When using WD-40 Specialist Bike Degreaser on my bike chain, should I rinse with water afterwards?

With the WD-40 Specialist® Bike Degreaser it is really up to how dirty the components are. The formula itself is fast evaporating and leaves no visible residue. So if it's not too dirty then just spray liberally and use a cloth to collect the dirty liquid, there is no need to use water. If the chain is severely dirty and greasy then it is a very good idea to rinse with water to help ensure that all of the dirty liquid is removed. In some cases you may need to reapply the degreaser to remove all of the previous dirt and greasy grime. Always remember that the WD-40 Specialist Bike Degreaser leaves no residue and therefore is not a corrosion inhibitor. To protect the chain, relubricate with a chain lube or apply a corrosion inhibitor like WD-40® Multi-Use-Product for storage.

Will WD-40 Multi-Use Product remove rust?

WD-40® Multi-Use Product helps remove rust by breaking down the bonds between metal and rust. Spray the rusted surface with WD-40 Multi-Use Product, enough to thoroughly soak the area. Allow it sit for up to 10 minutes. Clean the rusted item with a wire brush. With the rust loosened, the brush should clean away most of the corrosion. Brush the surface until you’re satisfied you removed most of the rust and wipe any remaining residue. End by spraying with WD-40 Multi-Use Product to protect the surfaces from future rust.

Who invented WD-40 Multi-Use Product?

Norman Larsen and The Rocket Chemical Company

When should I use a white lithium grease?

WD-40 Specialist® White Lithium Grease is a viscous, non-drip formula, ideal for metal-on-metal applications, and is suitable for high pressure, heavy loads. Additionally, WD-40 Specialist White Lithium Grease provides corrosion protection, and is durable and long-lasting.

When was WD-40 Multi-Use Product first made?

WD-40® Multi-Use-Product was first made in 1953.

Will WD-40 Multi-Use Product damage car paint?

WD-40® Multi-Use Product has been tested on many types of paint on various surfaces with no effect. Although WD-40 Multi-Use Product can be used on a variety of surfaces we recommend testing in an inconspicuous area before larger application. Wax polishes and certain wax coatings may be softened by WD-40 Multi-Use Product.

When should I use a Silicone Lubricant?

Use WD-40 Specialist® Silicone Lubricant when you need a lubricant that's clear, non-staining, and safe for most rubbers and plastics. This lubricant provides brilliant performance across a wide temperature range and offers excellent moisture resistance.

Where can I buy WD-40 Multi-Use Product?

WD-40® Multi-Use Product is available almost everywhere. It can be found in many countries in automotive, convenience, discount, drug, grocery, hardware, and home center stores. It's also available from leading distributors all over the world.

Will WD-40 Multi-Use Product damage paint?

WD-40® Multi-Use Product has been tested on many types of paint on various surfaces with no effect. Although WD-40 Multi-Use Product can be used on a variety of surfaces we recommend testing in an inconspicuous area before larger application. Wax polishes and certain wax coatings may be softened by WD-40 Multi-Use Product.

Why can't I empty all the product in my aerosol can?

Given that product "evacuation" issues, which occur when some product remains trapped inside a can and cannot be sprayed, are prevalent in the aerosol industry, they can impact the production of certain products. If you encounter difficulties with an aerosol can not spraying, we suggest following this concise troubleshooting guide: Shake the can vigorously. Turn the opening of the aerosol valve to the blue mark on the crown of the can. Hold the can vertically and not at an angle. If you're unable to get a result, contact us and we'll send you a replacement.

Kes leiutas WD-40 mitmeotstarbelise toote?

Norman Larsen ja The Rocket Chemical Company

Millal WD-40 mitmeotstarbeline toode esmakordselt valmistati?

WD-40® Multi-Use-Product toodeti esmakordselt 1953. aastal.

Kas WD-40 mitmeotstarbeline toode kahjustab värvi?

WD-40® mitmeotstarbelist toodet on katsetatud mitmel tüüpi värvil erinevatel pindadel ilma mõju avaldamata. Kuigi WD-40 Multi-Use Product'i võib kasutada erinevatel pindadel, soovitame enne suuremat kasutamist katsetada seda silmapaistmatul alal. WD-40 Multi-Use Product võib pehmendada vahapolitseid ja teatavaid vahakatteid.

Kust saab osta WD-40 mitmeotstarbelist toodet?

WD-40® mitmeotstarbeline toode on saadaval peaaegu kõikjal. Seda võib leida paljudes riikides autokauplustes, mugavuskauplustes, odavmüügipoodides, apteegipoodides, toidukauplustes, rauakauplustes ja kodukeskuste kauplustes. Samuti on see saadaval juhtivatelt edasimüüjatelt üle kogu maailma.

Millal peaksin kasutama valget liitiumrasva?

WD-40 Specialist® White Lithium Grease on viskoosne, tilkumisvastane koostis, mis sobib ideaalselt metallile ja metallile ning sobib suure rõhu ja raskete koormuste jaoks. Lisaks pakub WD-40 Specialist White Lithium Grease korrosioonikaitset ning on vastupidav ja kauakestev.

Kas WD-40 mitmeotstarbeline toode kahjustab auto värvi?

WD-40® mitmeotstarbelist toodet on katsetatud mitmel tüüpi värvil erinevatel pindadel ilma mõju avaldamata. Kuigi WD-40 Multi-Use Product'i võib kasutada erinevatel pindadel, soovitame enne suuremat kasutamist katsetada seda silmapaistmatul alal. WD-40 Multi-Use Product võib pehmendada vahapolitseid ja teatavaid vahakatteid.

Millal peaksin kasutama silikoonist määrdeainet?

Kasutage WD-40 Specialist® Silicone Lubricant'i, kui vajate määrdeainet, mis on selge, mittevärviline ja ohutu enamiku kummi ja plastide jaoks. See määrdeaine tagab särava jõudluse laias temperatuurivahemikus ja pakub suurepärast niiskuskindlust.

Kui ma kasutan WD-40 Specialist Bike Degreaser'i oma jalgratta ketile, kas ma peaksin pärast seda veega loputama?

WD-40 Specialist® Bike Degreaser'i puhul sõltub see tegelikult sellest, kui määrdunud on komponendid. Koostis ise aurustub kiiresti ja ei jäta nähtavaid jääke. Nii et kui see ei ole liiga määrdunud, siis pihustage lihtsalt ohtralt ja kasutage rätikuga määrdunud vedeliku kogumiseks, vett ei ole vaja kasutada. Kui kett on tugevalt määrdunud ja rasvane, siis on väga hea mõte loputada veega, et tagada kogu määrdunud vedeliku eemaldamine. Mõnel juhul võib olla vaja uuesti kasutada rasvaärastusvahendit, et eemaldada kogu varasem mustus ja rasvane mustus. Pidage alati meeles, et WD-40 Specialist Bike Degreaser ei jäta jääke ja seega ei ole see korrosiooni inhibeerija. Keti kaitsmiseks määrige see uuesti ketilõbuga või kasutage hoiustamiseks korrosiooniinhibiitorit, nagu WD-40® Multi-Use-Product.

Kas WD-40 mitmeotstarbeline toode eemaldab rooste?

WD-40® Multi-Use Product aitab eemaldada roostet, lõhkudes metalli ja rooste vahelisi sidemeid. Pihustage roostetanud pinda WD-40 Multi-Use Product'iga nii palju, et ala oleks põhjalikult läbi imbunud. Laske sellel mõjuda kuni 10 minutit. Puhastage roostetanud ese traatharjaga. Kui rooste on lahti, peaks harja abil enamus korrosioonist eemalduma. Harjake pinda, kuni olete veendunud, et olete suurema osa roostest eemaldanud, ja pühkige allesjäänud jäägid ära. Lõpuks pihustage pindade kaitsmiseks tulevase rooste eest WD-40 mitmeotstarbelise tootega.

Miks ma ei saa kogu toodet oma aerosoolpurgist tühjaks?

Arvestades, et aerosoolitööstuses on levinud toote "evakueerumise" probleemid, mis tekivad siis, kui osa tootest jääb purgi sisse ja seda ei saa pihustada, võivad need mõjutada teatavate toodete tootmist. Kui teil tekib probleeme aerosoolipurgi pihustamisega, soovitame järgida seda lühikest veaotsingu juhendit: Loksutage purki tugevalt. Keerake aerosooliventiili avaus purgi kroonil oleva sinise märgini. Hoidke purgi vertikaalselt, mitte nurga all. Kui te ei saa tulemust, võtke meiega ühendust ja me saadame teile asenduse.

What was WD-40 Multi-Use Product originally made for?

WD-40® Multi-Use-Product was first used to protect the outer skin of the Atlas Missile from rust and corrosion.

Milleks oli WD-40 mitmeotstarbeline toode algselt mõeldud?

WD-40® Multi-Use-Product'i kasutati esmakordselt Atlase raketi väliskesta kaitsmiseks rooste ja korrosiooni eest.

What can I use to release stuck door hinges?

You can use WD-40® Multi-Use Product to release stuck door hinges. Our original product is great for lubrication and to keep moving parts moving! However, if you are spraying near a painted surface, be mindful that WD-40 Multi-Use Product may cause stains. We also advise you to contact the manufacturer of the door or windows to ensure using products on them doesn't effect your warranty!

What can I use to release stuck window hinges and runners?

You can use WD-40® Multi-Use Product to release stuck window hinges and runners. Our original product is great for lubrication and to keep moving parts moving! However, if you are spraying near a painted surface, be mindful that WD-40 Multi-Use Product may cause stains. We also advise you to contact the manufacturer of the door or windows to ensure using products on them doesn't effect your warranty!

When should I use a Penetrant?

Use WD-40 Specialist® Penetrant Spray to quickly loosen and remove seized, corroded, bound, and rusted nuts, bolts, clips, locks, etc.

When should I use a contact cleaner?

Use WD-40 Specialist® Contact Cleaner Spray when you need to clean the metal electrical contact points in sensitive electronics and electrical equipment, including larger electric motors, armatures, relays, electric panels, and generators. It is safe to use on most plastics, rubber and metal when used as directed - cleans oil, dirt, flux residue and condensation without leaving residue behind. When using, keep the following advice in mind: To prevent any accidental damage always check the manufacturer’s instructions before applying product to device. Do not spray into cavities, openings, gaps or areas of your device where this product does not have sufficient airflow to assist full evaporation. Shake can well and isolate all power, allowing hot surfaces to cool. Tilt surface while cleaning to allow any excess liquid to run off and ensure product is completely dry before restoring power.

What does WD-40 Multi-Use-Product contain?

Although the exact components of WD-40® Multi-Use Product are not disclosed, WD-40 Multi-Use Product does not contain silicone, kerosene, water, graphite, chlorofluorocarbons (CFCs), or indeed fish oil as is commonly misreported. By providing a list of substances that are not present in its formulation, WD-40 Company assures consumers that it prioritises safety, effectiveness, and environmental consciousness. This transparency allows individuals to make informed decisions when selecting a versatile and reliable product for various applications.

When should I use a degreaser?

Use a degreaser product to quickly remove grease, oil, dirt, tar and more.

Is WD-40 Multi-Use Product conductive?

No, WD-40® Multi-Use Product is non-conductive and has a dielectric strength of 38 000V per 2.5mm which basically means that you would require more than 38 000V per 2.5mm of space between two metal contacts for electrical breakdown/conductance to occur. However, we don't advise you to use our Multi-Use-Product on an energised circuit. Our aerosol can and flexible straw are metal (conduct electricity) and could brush up against a contact. We always recommend disconnecting power, spraying, allowing sufficient ventilation and then reconnecting power.

Is WD-40 Multi-Use Product a degreaser?

WD-40® Multi-Use Product is not a degreaser - it is a lubricant, water-displacer, and removes and prevents rust and corrosion.

What is WD-40 Multi-Use Product used for?

WD-40® Multi-Use Product has over 2000 uses covering a variety of subjects and industries including home, garden and automotive.

Is WD-40 Multi-Use Product good for bicycle chains?

WD-40® Multi-Use Product is safe to be used on your bicycle chain and is great for displacing water on your chain after washing/cleaning, although we recommend using WD-40 Specialist® BIKE for more targeted lubrication on your bicycle as these products are specifically designed for your bike.

What should I use to degrease bare metal prior to painting?

You can use the WD-40 Specialist® Degreaser on bar metal prior to painting as it leaves no visible residue. Just let the product properly dry before you paint the metal.

Is WD-40 Specialist Degreaser safe to use on matte painted alloys?

WD-40 Specialist® Degreaser is an industrial degreaser that is for use on bare metals only, and should not be used on painted or coated surfaces, plastic, or rubber.

What does WD-40 Multi-Use Product do?

WD-40® Multi-Use Product fulfils the following basic functions: 1. LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts. 2. PENETRATES: WD-40 Multi-Use Product loosens rust-to-metal bonds and frees stuck, seized, or rusted metal parts. 3. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements. 4. DISPLACES MOISTURE: Because it displaces moisture, WD-40 Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.

Is WD-40 Multi-Use Product a lubricant?

Yes. While the “W-D” in WD-40 stands for Water Displacement, WD-40® Multi-Use Product is a unique, special blend of lubricants. The product’s formulation also contains anti-corrosion agents and ingredients for penetration and water displacement.

What does 'WD-40' stand for?

WD-40' literally stands for Water Displacement, 40th formula. That's the name straight out of the lab book used by the chemist who developed the product back in 1953. The chemist, Norm Larsen, was attempting to concoct a formula to prevent corrosion—a task which is done by displacing water. Norm's persistence paid off when he perfected the formula on his 40th try.

Is WD-40 Multi-Use-Product safe to use on electrical voltages as a moisture repellent with circuits energised?

Our Multi-Use-Product is designed to displace moisture and has a dielectric strength of 38 000V per 2.5mm which basically means that you would require more than 38 000V per 2.5mm of space between two metal contacts for electrical breakdown/conductance to occur. However, we don't advise you to use our Multi-Use-Product on an energised circuit. Our aerosol can and flexible straw are metal (conduct electricity) and could brush up against a contact. We always recommend disconnecting power, spraying, allowing sufficient ventilation and then reconnecting power.

What is WD-40 Specialist Bike ?

WD-40 Specialist® Bike is a high-performance line of bicycle care products developed via collaboration between WD-40 Company scientists, professional bike mechanics and independent bicycle retailers. The WD-40 Specialist Bike line was designed for maintenance-minded cycling enthusiasts.

What is WD-40 Specialist?

WD-40 Specialist® is a line of specialized products designed to meet the unique needs of professionals and DIY enthusiasts. These products are formulated with advanced technology to provide enhanced performance in a variety of applications. Whether it's lubricating tools and machinery, protecting against rust and corrosion, or loosening stuck or frozen parts, WD-40 Specialist has a solution for every job. With a wide range of products including lubricants, degreasers, and penetrants, WD-40 Specialist is the go-to brand for those who expect nothing but the best.

What can I use on the moving parts, catches, locks on my doors and windows?

Using WD-40 Multi-Use Product as a penetrant to release stuck window hinges and to displace water after washing is a great use of our product. For light lubrication especially of locks and catches, you can use WD-40 Multi-Use Product, but for the more specialist user we suggest applying the following after MUP. For light hinges and rails use WD-40 Specialist Silicone (or Specialist Dry PTFE) as it is great at eliminating sticking and binding. Make sure to wipe up any over spray though as we don't want it getting onto any curtains. For heavier windows and ratchet systems use WD-40 Specialist White Lithium Grease The above two options (Silicone and WLG) would be more than sufficient for any window lubrication and corrosion protection. If you know that a particular window rail, hinge or ratchet will be subject to extreme conditions and are worried about corrosion and seizing then Specialist Spray Grease with the added WD-40 formula would be the one to use for corrosion protection but these situations are unlikely to occur. If you are spraying near a painted surface, be mindful that WD-40® Multi-Use Product may cause stains. We also advise you to contact the manufacturer of the door or windows to ensure using products on them doesn't affect your warranty! Just remember, you should make sure to clean out all the grime to give our greases a fair chance to work and wipe off any excess MUP before applying our greases. Small amounts of MUP left won't affect the performance of our greases. The important thing is to apply our greases to a clean surface with no grime or older grease.

Millal peaksin kasutama kontaktpuhastusvahendit?

Kasutage WD-40 Specialist® Contact Cleaner Spray't, kui teil on vaja puhastada tundliku elektroonika ja elektriseadmete, sealhulgas suuremate elektrimootorite, armatuuride, releede, elektrikilpide ja generaatorite metallist kontaktpunkte. Seda on ohutu kasutada enamiku plastide, kummi ja metallide peal, kui seda kasutatakse vastavalt juhistele - puhastab õli, mustuse, voolujääkide ja kondensaadi jääke jätmata. Kasutamisel pidage silmas järgmisi nõuandeid: Juhuslike kahjustuste vältimiseks kontrollige alati tootja juhiseid enne toote seadmele pealekandmist. Ärge pihustage seadme õõnsustesse, avadesse, lõhedesse või kohtadesse, kus selle toote täielikuks aurustumiseks puudub piisav õhuvool. Loksutage purgi hästi ja eraldage kogu võimsus, lastes kuumadel pindadel jahtuda. Kallutage pinda puhastamise ajal, et liigne vedelik saaks maha voolata, ja veenduge, et toode on enne voolu taastamist täielikult kuivanud.

Millega saab vabastada kinni jäänud aknasarnaid ja -jooksikuid?

Kinnijäänud aknasangade ja jooksikute vabastamiseks võite kasutada WD-40® Multi-Use Product'i. Meie originaaltoode sobib suurepäraselt määrimiseks ja liikuvate osade liikumises hoidmiseks! Kui pihustate aga värvitud pinna läheduses, arvestage, et WD-40 Multi-Use Product võib tekitada plekke. Samuti soovitame teil võtta ühendust ukse või akende tootjaga, et tagada, et toodete kasutamine nende peal ei mõjuta teie garantiid!

Kas WD-40 mitmeotstarbeline toode on rasvatustamisvahend?

WD-40® Multi-Use Product ei ole rasvaärastusvahend - see on määrdeaine, veeplahusti ning eemaldab ja takistab roostet ja korrosiooni.

Millal ma peaksin rasvatustamisvahendit kasutama?

Kasutage rasvatustamisvahendit, et eemaldada kiiresti rasv, õli, mustus, tõrv ja muu.

Milleks kasutatakse WD-40 mitmeotstarbelist toodet?

WD-40® Multi-Use Product'il on üle 2000 kasutusvõimaluse, mis hõlmab erinevaid teemasid ja tööstusharusid, sealhulgas kodu, aed ja autotööstus.

Kas WD-40 mitmeotstarbeline toode on juhtiv?

Ei, WD-40® Multi-Use Product on mittejuhtiv ja selle dielektriline tugevus on 38 000 V 2,5 mm kohta, mis põhimõtteliselt tähendab, et kahe metallkontakti vahel on vaja rohkem kui 38 000 V 2,5 mm ruumi kohta, et tekiks elektriline katkestus/juhtivus. Siiski ei soovita me kasutada meie mitmeotstarbelist toodet voolu all olevas vooluahelas. Meie aerosoolipurk ja painduv kõrre on metallist (juhivad elektrit) ja võivad puutuda vastu kontakti. Soovitame alati voolu katkestada, pihustada, võimaldada piisavat ventilatsiooni ja seejärel voolu uuesti ühendada.

Mida sisaldab WD-40 Multi-Use-Product?

Kuigi WD-40® mitmeotstarbelise toote täpseid koostisosi ei ole avalikustatud, ei sisalda WD-40 mitmeotstarbeline toode silikooni, petrooli, vett, grafiiti, klorofluorosüsivesinikke (CFC) ega ka kalaõli, nagu tavaliselt ekslikult väidetakse. Esitades nimekirja ainetest, mida selle koostises ei ole, kinnitab WD-40 Company tarbijatele, et ta seab prioriteediks ohutuse, tõhususe ja keskkonnateadlikkuse. Selline läbipaistvus võimaldab inimestel teha teadlikke otsuseid, kui nad valivad mitmekülgset ja usaldusväärset toodet erinevateks rakendusteks.

Millal ma peaksin kasutama penetranti?

Kasutage WD-40 Specialist® Penetrant Spray't, et kiiresti lahti saada ja eemaldada kinnijäänud, korrodeerunud, seotud ja roostetanud mutrid, poldid, klambrid, lukud jne.

Millega saab kinnijäänud uksehinged vabastada?

Kinnijäänud uksehingede vabastamiseks võite kasutada WD-40® Multi-Use Product'i. Meie originaaltoode sobib suurepäraselt määrimiseks ja liikuvate osade liikumises hoidmiseks! Kui pihustate aga värvitud pinna läheduses, arvestage, et WD-40 Multi-Use Product võib tekitada plekke. Samuti soovitame teil võtta ühendust ukse või akende tootjaga, et tagada, et toodete kasutamine nende peal ei mõjuta teie garantiid!

Kas WD-40 mitmeotstarbeline toode on määrdeaine?

Jah. Kuigi "W-D" WD-40-s tähendab "Water Displacement", on WD-40® Multi-Use Product unikaalne spetsiaalne määrdeainete segu. Toote koostis sisaldab ka korrosioonivastaseid aineid ja koostisosi läbitungimiseks ja vee väljatõrjumiseks.

Võtke meiega ühendust

GETZ EESTI AS
Teguri 47b
50107 TARTU

+372 7362531

getz@getz.ee

Tooted

Teave toote kohta

WD-40 kohta

Kuidas Teha

Uus painduv KÕRS, et saavutada kättesaamatut

Võtke meiega ühendust